濟南中陽石磨電器有限公司

全國熱線電話:

17116125111

熱門搜索: 豆漿石磨機 石磨面粉機 豆漿石磨機 石磨面粉機
聯系我們
    濟南中陽石磨電器有限公司
  • 聯系:和經理
  • 電話:17116125111
  • 手機:17116125111
  • 郵箱:3471464452@qq.com
  • 網址:http://www.yudikj.com
  • 廠址:山東省濟南市章丘區相公莊鎮
新聞資訊 您現在的位置:首頁 - 新聞資訊

面粉石磨機出面少或出粉率低是怎么回事?

來源:http://www.yudikj.com/發布時間:2022-03-08

面粉石磨機出面少或出粉率低是怎么回事? How is it that the flour stone mill has less flour or low flour yield? 昨天一

面粉石磨機出面少或出粉率低是怎么回事?
How is it that the flour stone mill has less flour or low flour yield?
昨天一客戶問我,面粉石磨機出面少呢,這種情況可能和小麥質量有關,也有可能跟設備質量有關,每個廠家生產的面粉石磨機出面率都不太一樣,濟南中陽石磨面粉石磨機生產廠家總結磨面機從出粉率低的原因。
Yesterday, a customer asked me that the flour stone mill has little flour output. This situation may be related to the quality of wheat or equipment. The flour stone mill output rate produced by each manufacturer is different. Jinan Zhongyang stone mill flour stone mill manufacturer summarized the reasons for the low flour output rate of the flour mill.
當面粉石磨機工作正常時,麩皮大小均勻,無胚乳顆粒,附面少,呈暗黃色。麩片太大時,皮磨軋距必偏寬,出粉率降低;麩片太小,皮磨軋距偏窄,出粉率上升。麩片大小不均時,面粉加工機械皮磨磨輥間隙兩側肯定不一樣,當麩片附面多,顯白色時,多是心磨軋距偏寬,取粉率下降所致;當麩片中含有胚乳顆粒時,可能是心磨磨輥間隙兩側不一致,或是心磨離合沒合閘。
When the flour stone mill works normally, the size of bran is uniform, there are no endosperm particles, there are few boundary surfaces, and it is dark yellow. When the bran is too large, the milling distance must be wider and the flour yield will be reduced; The bran is too small, the milling distance is too narrow, and the flour yield increases. When the size of bran is uneven, the gap between the two sides of the bran grinding roller of flour processing machinery must be different. When the bran has many boundary surfaces and appears white, it is mostly due to the wide central grinding distance and the decrease of powder extraction rate; When the bran contains endosperm particles, it may be that the gap between the two sides of the grinding roller is inconsistent, or the clutch of the grinding roller is not closed.
操作時要經常觀察麩皮和次粉來判斷出粉率的變化,以盡快采取措施。面粉加工機械振較大,時常引起軋距的變松或變緊,造成出粉率變化。在生產操作時要經常檢查磨面機的軋距,及時糾正軋距變化引起的出粉率波動。
Take measures as soon as possible to judge the change of wheat bran and flour yield. The vibration of flour processing machinery is large, which often causes the loosening or tightening of rolling distance, resulting in the change of flour yield. During production and operation, the rolling distance of the grinding machine shall be checked frequently, and the fluctuation of powder yield caused by the change of rolling distance shall be corrected in time.
大家好,今天問大家一個俗氣但有實用的問題,農村磨坊有的配有清糧機、洗麥機,而有的磨坊不配置這些設備?為什么呢,之前采訪過一位我的客戶,他的磨坊只有磨面機,沒有洗麥機,看到磨面機加工的小麥中含有很多麥稈雜質,看起來很臟的樣子,不清楚是人食用的,還是磨粉為牲畜。
Hello everyone, today I ask you a tacky but practical question. Some rural mills are equipped with grain cleaners and wheat washers, while some mills are not equipped with these equipment? Why? I interviewed one of my customers before. His mill only has a flour mill without a wheat washing machine. I saw that the wheat processed by the flour mill contains a lot of straw impurities and looks very dirty. I don't know whether it is eaten by people or ground for livestock.
現在小麥都是大型聯合收割機,然后拉到馬路上曬干,這樣就造成了小麥中含有麥稈、泥塊、石子等雜質。如果小麥不清洗直接磨面話,不但會損傷磨面機,而且磨出面會牙磣。我們清洗小麥方法分為人工清洗和機器清洗,如果是自己磨面供給家人食用,可以使用人工清洗方法。但如果是開面粉廠,人工清洗費時又費力,建議用清糧機、洗麥機清洗小麥,這樣既方便又輕松,而且清理的非常干凈。
Now wheat is a large combine harvester, which is then pulled to the road to dry, resulting in wheat containing straw, mud, stones and other impurities. If the wheat is not cleaned and grinded directly, it will not only damage the grinder, but also make the flour shabby. Our wheat cleaning methods are divided into manual cleaning and machine cleaning. If we grind our own flour for family consumption, we can use manual cleaning methods. However, if it is to open a flour mill, manual cleaning is time-consuming and laborious. It is recommended to use a grain cleaner and wheat washer to clean the wheat, which is convenient and easy, and the cleaning is very clean.
相關新聞
相關產品
首頁 走進中陽 產品中心 石磨小吃 新聞資訊 聯系我們 網站地圖 XML TXT
濟南中陽石磨電器有限公司

魯公網安備 37018102000574號

A狠狠久久蜜臀婷色中文网_久久婷婷五月综合色首页_久久综合伊人77777_久久国产老子精品无码